Pymate-16ADI16DO-introduction

From pymate.io wiki
Revision as of 19:25, 23 June 2026 by Dodomi (talk | contribs) (Created page with "{{PYMATE-HEADER}} == Important note == Charts and graphics are made to be easy to follow. The Pymate boards are drawed without connectors to avoids parallax shift. The real board are fitted with the connectors. == Board_ID == It is essential to identify the '''Board_ID''' of the 16ADI16DO expansion. {{ttuto-begin}} {{ttuto |label=Board_ID |descr=Identification of expansion board |img=tlogo-board-id.png |link=PymateIO-about-board_id }} {{ttuto |label=CAN...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Important note

Charts and graphics are made to be easy to follow.

The Pymate boards are drawed without connectors to avoids parallax shift. The real board are fitted with the connectors.

Board_ID

It is essential to identify the Board_ID of the 16ADI16DO expansion.

Board_ID

Tlogo-board-id.png

Identification of expansion board

CAN Scan

Tlogo-can-scan.png

Scanning the CAN bus for boards and check for CAN error.

Change Board_ID

Tlogo-board-id.png

How to change the 16ADI16DO board identification on the CAN bus.

 


Input

Input are high when voltage on the Input is higher than 8V.

Retrieved from "https://www.docs.pymate.io:443/index.php?title=Pymate-16ADI16DO-introduction&oldid=723"